What is Radome Heater (Deicing)?

 

       Radome heater is a special product which is mounted on the front surface of antennas to prevent icing and to minimize data exchange.

 

Product General Features:

 

    In the middle section, resistance is not used to prevent signal pollution.

    Outer frame is made of 304 stainless material and protection class is IP 65

    Power consumption is kept to a minimum and low energy cost.

 

Radio Link Dish Antenna Deicing Heated Radome Systems

 

- Product; It is a chemical fluid structure that works with 12 V DC and is manufactured to prevent icing by mounting on the front surface of the antenna (30-60-120cm).

- The front part of the radome is protected against icing by the continuous circulation of the chemical through the channels in the 12mm plexiglass.

- The system has a hysteresis value of 2 ° C and activates the resistance when the temperature drops below 3 ° C and is deactivated at 5 ° C and above.

- It has 2 relay outputs on the Temperature Indicator and the outputs are used to inform the remote monitoring units about the operating status.

 

 Radio Link Dish Antenna Resistance Heated Radome Systems

 

- The product is 24 V AC and is installed on the front surface of the antenna (30-60-120cm) to prevent icing.

- The system has a hysteresis value of 2 ° C and activates the resistance when the temperature drops below 3 ° C and is deactivated at 5 ° C and above.

- It has 2 relay outputs on the Temperature Indicator and the outputs are used to inform the remote monitoring units about the operating status.